Selected:

ACRYLIC WATER PROOF ULTRA ROOFING

د.إ120.00 د.إ105.00

Sale!

ACRYLIC WATER PROOF ULTRA ROOFING

د.إ120.00 د.إ105.00

APLICATION INSTRUCTIONS

Surface should be free from oil, grease and loose particles. In case of metal surface, remove rust and contamination for better protection, If the surface has been already treated with asphalt or bitumen coatings or roofing’s felts and any blisters, peel-off traces, loose laying, etc. must be cut away and be properly filled. Masonry joints must be flush jointed. In case of tiling the roof, terrace, balcony or sun shade, the joints between the tiles should be properly filled to avoid water penetration through the joints.

Mix well the container. Apply primer coat of ULTRA ROOFING i.e. 25 % -30 % diluted with water by brush , spray or roller. After the primer coat is completely dried, apply minimum two coats of undiluted ULTRA ROOFING. It is very important to ensure each coat is totally cured (i.e. 8 hours at 30°C) before the next coat is applied. For better result use ULTRA ROOFING GLASS FIBRE REINFORCING AGENT embedded into first coat of ULTRA ROOFING while still wet mainly expansion areas joints with parapet. All brushes and tools should be cleaned by water immediately after use . ULTRA ROOFING can be diluted with water ( 5-10 % ) for easy application.

COVERAGE-depend upon the nature of the surface to be applied. But on average, smooth surface will give First Coat 350 gm/sq.mt. & 300 gm/sq.mt. (Second coat) Two coats will give 1mm dry film thickness.

SAFETY Non-hazardous. If ingested, seek medical advice.

STORAGE: Minimum 12 months in unopened container. Store away from sunlight and preferably below 30°C. PACKING: ULTRA ROOFING is available in 20 kg pails 21 P ag e COMPLETE SOLUTION FOR Ultra bond

Add to Wishlist
Add to Wishlist

Description

ACRYLIC WATER PROOF ULTRA ROOFING

DESCRIPTION

ACRYLIC WATER PROOF ULTRA ROOFIN is a special synthetic resin based water proof coating. Because of its excellent flexibility and thixotropic nature is an ideal for use on vertical as well as horizontal surfaces.

It is single pack, very economical and pollution free water proof coating. Due to its white colour, it has excellent solar insulation capacity

ADVANTAGES:

Life and durability of the structure is increased.

Easy application, no machinery required.

Light weight compared to conventional roofing systems, thereby loading on the roofs is reduced.

Provides seamless and joint free seal throughout the surface, which is impervious to water.

Lower labour cost due to easy, simple and quick application, leading to quick completion and time saving.

Provides insulation due to solar reflection.

Excellent bonding to most building materials.

It provide protective membrane for polyurethane foam insulation

Water proofing of plaza, car park deck

Water proofing cum decorating of external plastered walls.

Water proofing of new surfaces as well as for the repairs of old surface, whether previously treated or not .

Suitable for horizontal as well as vertical surfaces like flashings

Water proofing of roof slabs, terraces, balconies, sun shades, parapet walls, etc

Water proofing of flashing, roof edgings, gulley’s, steeply pitched designs, etc

ULTRA ROOFING -provides additional water proofing and protection when used as base and/or intermediate coat in brick bat coba and/or IPS floorings.

ULTRA ROOFING is optimally suitable for application on structures having complicated geometry like domes, arches, shells, folded plates, paraboloids, corrugated sheets, etc For garde, swimming pools, basement, sandwich application is recommended

White Thixotropic 65 % Heated 2 % 1.27 + 0.1 Approximately 1.0 mm,Wet Film. 4 Hours minimum.None, after 4 Hours 16 Mils wet Film. 48 Hours. 440 psi, ASTM D-412. 60, ASTM D-2240 :2.8 PERMS 20 Mils Dry Film. 0.05 PERMS inches. -29°C NONE 430 psi 460 % Brush, Roller, Spray or Squeegee

APPEARANCE SOLID CONTENT SPECIFIC GRAVITY THICKNESS COAT RE-COATINTERNAL SURFACE DRY TIME CURING TIME TENSILE STRENGTH HARDNESS SHORE A PERMEANCE PERMEABILITY TEMPERATURE LIMITS 20 MILS : CRACKING TENSILE STRENGTH ELONGATION METHODS OF APPLICATION +93 C NONE 430 psi 460 %

Note: All information is given in good faith on the results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since we don’t have any control on site conditions and its uses.

Additional information

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “ACRYLIC WATER PROOF ULTRA ROOFING”

Your email address will not be published. Required fields are marked *

Close Menu
×
×
×

Cart

%d bloggers like this: